Uploaded: Wednesday, October 10th 2018 10:16:50 AM under Bedding by Chloe Jorgensen.
Dimension: 2284x1649 pixels.
Resolution: High Resolution.
Total: 51 image Bedding Design.
First, check if you have a room with space enough to fit a regular bed or just a toddler bed. Other than the bed, babies’ rooms are the most jam-packed with all the clutter and toys. Plus, toddler babies usually play in their rooms so you would want to have enough space for them to also move around. Toddler beds are smaller so it wouldn’t consume that much space in the room. It is the best choice for a smooth transition. It will give your toddler enough the size of the bed and enough space in the room. While a regular bed gives more space to sleep in, its size can occupy much of the space in the room leaving your toddler with little space for a play area.
Attach the sideboards to the headboard and footboard using small screws and some wood adhesive, being careful not to crack the wood by using screws which are too big. Next we do the outer trims, which should again be cut using the same dimensions as the bed. Attach these to the bed frame. Now we move on to the slats which add stability to the bed. Cut a dozen of these pieces and attach them between the sideboards at regular even intervals. These can be screwed to the bed frame using small screws. If you have small joint cracks you can apply some of the filler/adhesive/spackle you bought to fill these in. Always perform a strength check at this point as any inherent weaknesses will be amplified at the finished stage by loose joints or cracked wood during the building process.