Uploaded: Wednesday, October 10th 2018 05:50:25 AM under Bedding by Cerise De Jong.
Dimension: 1740x1740 pixels.
Resolution: High Resolution.
Total: 53 image Bedding Design.
Second, you can use the old crib mattress for a toddler bed. This will lessen the cost of your getting a new bed. You also wouldn’t have to buy new beddings for the new bed since old beddings on your crib mattress can also be used for this. However if the time comes that you need to buy new beddings, some stores have sizes only designed for particular beds. So instead of saving on beddings, it will even be more costly for you. Third, think of your toddler’s safety. Toddler beds are usually lower to the floor compared to the regular beds so it is a lot easier to get in and out of the bed. Railings also add security on the bed since this could prevent your toddler from falling off. Whereas if you will get a regular bed, you would still have to add railings on it so it would cost you additional bucks.
Attach the sideboards to the headboard and footboard using small screws and some wood adhesive, being careful not to crack the wood by using screws which are too big. Next we do the outer trims, which should again be cut using the same dimensions as the bed. Attach these to the bed frame. Now we move on to the slats which add stability to the bed. Cut a dozen of these pieces and attach them between the sideboards at regular even intervals. These can be screwed to the bed frame using small screws. If you have small joint cracks you can apply some of the filler/adhesive/spackle you bought to fill these in. Always perform a strength check at this point as any inherent weaknesses will be amplified at the finished stage by loose joints or cracked wood during the building process.