Published by semut02 at Thursday, October 11th 2018 02:22:15 AM under Bedding
There are certain pieces of furniture in a house that are essential and one of these is a bed. It doesn’t matter what kind of bed, be it single, double, Queen or even King-sized, but the fact of the matter is, everybody sleeps on a bed of some type for usually for a good 6-8 hours every day. With a piece of furniture so essential to everyday living, wouldn’t it be great if you could save the high cost of buying this bed by learning how to make one for yourself using woodworking bed plans.
Attach the sideboards to the headboard and footboard using small screws and some wood adhesive, being careful not to crack the wood by using screws which are too big. Next we do the outer trims, which should again be cut using the same dimensions as the bed. Attach these to the bed frame. Now we move on to the slats which add stability to the bed. Cut a dozen of these pieces and attach them between the sideboards at regular even intervals. These can be screwed to the bed frame using small screws. If you have small joint cracks you can apply some of the filler/adhesive/spackle you bought to fill these in. Always perform a strength check at this point as any inherent weaknesses will be amplified at the finished stage by loose joints or cracked wood during the building process.
The disadvantage of getting a toddler bed is it can only be used for some time. These beds can only be used for babies about one and a half to three and a half years of age. After that, it would be useless. This can be just an additional cost. So if getting a new bed for your toddler is as easy as you think, put it this way: weigh the pros and cons. Remember a baby would be the one sleeping on it so it would require a little more caution. Think also of your budget. If for the mean time you can only spend this much for a bed, then better to get a less costly one.