Published by semut02 at Monday, October 15th 2018 02:14:27 AM under Bedding
Attach the sideboards to the headboard and footboard using small screws and some wood adhesive, being careful not to crack the wood by using screws which are too big. Next we do the outer trims, which should again be cut using the same dimensions as the bed. Attach these to the bed frame. Now we move on to the slats which add stability to the bed. Cut a dozen of these pieces and attach them between the sideboards at regular even intervals. These can be screwed to the bed frame using small screws. If you have small joint cracks you can apply some of the filler/adhesive/spackle you bought to fill these in. Always perform a strength check at this point as any inherent weaknesses will be amplified at the finished stage by loose joints or cracked wood during the building process.
If we start by taking a look at the wood, we would advise using MDF (medium density fibreboard) for the bed as this will give it an overall strength. For your army of tools you’ll require saws, sanding machines or paper and ideally a jigsaw plus nail gun, although obviously you can start with the more manual tools like a simple hammer, but you will find a small investment in tools will make all of your woodwork projects much easier time and effort wise. Don’t forget other sundries including nails, screws, adhesives, filler and spackle to cover over thin cracks in the wood joints.
There are certain pieces of furniture in a house that are essential and one of these is a bed. It doesn’t matter what kind of bed, be it single, double, Queen or even King-sized, but the fact of the matter is, everybody sleeps on a bed of some type for usually for a good 6-8 hours every day. With a piece of furniture so essential to everyday living, wouldn’t it be great if you could save the high cost of buying this bed by learning how to make one for yourself using woodworking bed plans.